? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron semiconductor technical data data sheet 577, rev. c hermetic power schottky rectifier 200 c maximum operation temperature description: 200 volt, 3 amp, hermetic power schottky rectifier in a shd - 1/1a/1 b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 200 volts maximum dc output current (with cathode maintained @ t c =100 o c) i o 3.0 amps maximum nonrepetitive forward surge current (t=8.3ms, sine) i fsm 55 amps maximum junction capacitance (v r =5v) c t 60 pf maximum thermal resistance (junction to mounting surface, c athode) r jc 7.07 c/w maximum operating and storage temperature range top/tstg - 65 to + 200 c electrical characteristics characteristic maximum forward voltage drop, pulsed (i f = 3.0 amps) t j = 25 c t j = 125 c v f 0.92 0.76 volts maximum reverse current (i r @ 200v piv) t j = 25 c t j = 125 c i r 0.07 4 .6 ma shd116046 SHD116046B
? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 577, rev. c mechanical dimension s: in inches / mm shd116046 SHD116046B shd - 1b shd - 1 .225.010 (5.71.254) .075 (1.91) max alumina ring .225.010 (5.71.254) moly lid moly base .090 (2.29) max alumina ring moly bas e (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .225.010 (5.71.254) .150.010 (3.81.254) .375.020 (9.52.508) .225.010 (5.71.254) .015.005 (.381.127) copper anode 0.0 0.2 0.4 0.6 0.8 1.0 forward voltage drop - v f (v) 10 -3 10 -2 10 -1 10 0 instantaneous forward current - i f (a) typical forward characteristics 125 c 200 c 175 c 25 c 0 40 80 120 160 200 240 reverse voltage - v r (v) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 200 c 175 c 0 40 80 120 160 200 240 reverse voltage - v r (v) 0 15 30 45 60 junction capacitance - c t (pf) typical junction capacitance
? 1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 577, rev. c shd116046 SHD116046B disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to c hange without prior notice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the late st version of the datasheet(s). 2 - in cases where extremely high reliability is requi red (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precaution s or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the datasheet(s). sensitron semiconductor assumes no respo nsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconduc tor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their ap plication will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies), the necessary procedures are to be taken in accordan ce with related laws and regulations.
|
